AMC Service Tip – Replacing Stuck or Blind Hole Bearing Races

Problem Removing Stuck Bearing Races Tapered roller bearings are commonly found in wheel bearings, transmission, differentials, and other automotive systems. They consist of two parts, the bearing cone with the roller bearing, and a “race”, which is the highly polished and hardened surface on which the bearing rides. The race is pressed into the part or casting and the roller bearing installed on top of it. So let’s say you have a bearing race (transmission, wheel, differential or other) in a “blind” hole that you need to replace. By “blind” we mean you can’t access it from the back of the [...]

By | November 22nd, 2017|Case Studies|Comments Off on AMC Service Tip – Replacing Stuck or Blind Hole Bearing Races

Volvo and Land Rover Differential Problems – Out Of Town – We’ll Repair – Send To Us

The Problem This 2010 Volvo XC70 came to us with about 96K miles, and a loud noise coming from the rear of the vehicle. The noise was noticeable at low and moderate speeds while driving, and sounded like a loud whine or hum depending on vehicle speed. Initially this noise sounded like a defective wheel bearing but on further exam we determined the noise was in fact coming from the rear differential, the gear system that transmits force from the transmission to the rear wheels. We've seen this before, both on the later model Volvo and the Land Rover LR2 vehicles, and [...]

By | April 11th, 2017|Case Studies|Comments Off on Volvo and Land Rover Differential Problems – Out Of Town – We’ll Repair – Send To Us